Difference between revisions of "Public transportation"
Revision as of 18:09, 17 May 2013
This article is a travel topic
The most common type of vehicle used for public transport is the bus. Nearly all cities that have other types of vehicles operating part of their public transportation systems also have buses. Buses come in a variety of sizes and styles and vary in seating capacity.
All buses have a human driver whose duty it is to drive the bus. On some buses, the driver also collects fares, while on others, there is another person who performs that task, and on some buses, fares are placed in a box.
Buses typically have routes that are identified by a number or letter. A sign, which could be fixed or electronic, often states the route number and final destination of the bus.
Fixed-route bus lines will operate along a predetermined route, and will stop at designated stops along that route, typically marked by bus stop signs on the street. Some bus stops will have benches and/or shelters; others will not.
In some places, flexible bus routes exist that may deviate from their route in order to provide door to door transportation. When this is the case, the deviation may need to be arranged through the transit company in advance.
Many large urban areas have heavy rail systems. Often referred to as "subway," "metro," or similar, these trains operate on a closed off track that could be above, below, or at grade level, varying depending on the part of the route.
Heavy rail stations generally have large stations, where riders can purchase tickets from machines, then proceed through gates to a platform, where trains arrive. In dense urban areas, the stations are usually located underground, and the corridors leading to them can sometimes have shops and other functions. Sometimes, special pathways connect to important buildings, enabling riders to go straight from the building to the station without taking foot outside.
In most systems, where multiple lines meet in one station, it is possible to transfer between the two lines without exiting the gate. Signs with arrows will point to where to go to get to the boarding platform of the other train. This may entail walking up or down a flight of steps, riding an elevator or escalator, or walking through a tunnel. In some stations, the boarding platforms for trains on the same line heading in opposite directions may not be directly accessible to one another.
Heavy rail is usually powered by a "third rail." This rail lies on the track together with the two rails the train runs on. Touching the third rail means instant death, so never go onto the tracks for any reason!!!
Light rail is also a common form of public transport. Light rail trains typically operate at grade level, and on some parts of their route may share the street with vehicle traffic, very much like trolleys or streetcars. Some light rail trains tunnel underground for part of their route, very much like heavy rail.
Trolleys or streetcars are vehicles that operate along rails built into the street with overhead electrical lines. Trolleys are an old form of public transport that have been dismantled in many places. But some cities have retained or rebuilt their trolleys and streetcars for nostalgic purposes.
Trolleys and streetcars can be boarded in the same way as buses at fixed stops along the street. They essentially perform the same function as buses.
In some places, the trolleys move slower than buses at a more relaxed pace.
Ferries are maritime vehicles used to transport people and sometimes automobiles across bodies of water. Ferries vary in size and distance covered. Some municipal ferries operate frequently along a route, taking just minutes to transverse a body of water. Others can be hours long and operate between two different cities.
In some places, particularly mountainous regions where roads are absent, cable cars are used to transport people over a distance.
Some mountains have inclines that carry passengers up and down the mountain. Inclines are very much like elevators, except that they are not completely vertical.
Most public transportation require payment of a fare in order to ride. On buses, the fare is typically paid upon boarding. Rail services generally have machines at stations from which tickets or tokens can be purchased, and these are placed in a slot, after which the passenger passes through a turnstile. Some rail services use a proof-of-payment system in which the ticket is displayed to a conductor or fare enforcement officer who either is present on all trains, or may check random trains.
On some systems, there is a flat fare, regardless of the distance traveled. Others use a zone system, where the fare varies, depending on the number of zones in which one travels.
When it comes to a multi-vehicle trip, some systems offer transfers that allow riders to change vehicles, which may be for a fee or no charge. Some systems sell all day passes that allow for unlimited travel within a region.
Multi-trip tickets exist in most places too, allowing people to use the service often to save money. Some systems sell packets where a fixed number of trips can be purchased at a fixed but reduced average price. These usually can be shared between more than one person. Other systems offer passes in which unlimited rides can be obtained for the period of time for which it is purchased, which could be a day, a certain number of days, a week, a month, or more rarely, a year. These cannot be shared between multiple people, and to do so is fraudulent. In some cases, multi-trip tickets and passes may come at a savings even for tourists who are visiting a city or town.
Route maps and schedules
Most bus lines follow a fixed route along a single street or road or a series thereof. Generally, a map is published of this route, showing riders that route.
Bus and rail lines also have schedules of when trips run. The schedule is generally published in a timetable which usually reads in chart form.
Routes and schedules are usually published in printed brochures available in the area served by the line (and sometimes on buses) and/or on the internet.
The schedule of a bus or rail route may vary by time of day or day of the week.
Hours and frequency
Each service has operating hours, which in most cases, are not around the clock. Some lines may be limited to certain days of the week or peak hours.
Frequency refers to the intervals between scheduled runs. The frequency of a bus or rail service may vary by time of day or day of the week.
Getting on the correct bus/train
When you are using public transportation, it is not uncommon for buses to share common stops or sections of routes, or train lines to share common track. When this occurs, it is necessary to read the destination sign of the bus or train to make sure you are getting on the line you plan to. If you are uncertain, ask the driver.
Getting on the wrong bus or train can be a costly mistake that can waste a lot of time and get you seriously lost.
Some bus and rail services have routes with two or more branches. On such routes, all trips have a common origin on one end, and two or more destinations on the other. On such routes, the part that is shared by all trips could have a heavy demand for service, and the parts that only some trips operate on have a lower demand.
When traveling on a route with multiple branches, be sure to read the destination sign to make sure the bus or train goes where you are. Catching the wrong bus may result in you being brought far from your destination, and getting to where you want to go would then require you to catch a bus on the wrong branch in the opposite direction, followed by catching a bus with the correct destination at the split point, all with the lower frequency of service.
Some bus routes have some trips that make short turns. A short turn is a trip on a scheduled bus route that does not travel the full length of the route, but lays over at an earlier location. On some routes, as many as half of the trips or sometimes even more can have short turns. On others, the short turns may be occasional. Regardless, if you are traveling on a route with a short turn on some of its trips, read the destination sign carefully. If you board a bus or train that is not going as far as you are, you may be forced to get off and wait for another bus, and in some cases, pay another fare.
Sometimes, pairs of routes have substantial overlapping sections. Two or more bus or rail routes may have different origins or destinations at both ends, but have a common section in the middle that overlaps, thereby enabling riders who are traveling strictly within this zone to have a choice of routes. In some systems, schedules are planned carefully so buses traveling in this section have evenly spaced schedules, thereby enabling a doubled frequency of service.
Some bus and rail routes function as "express" or "limited stop," meaning that they will bypass at least some of the stops along their route. Such a route may stop where you plan to board, but will bypass the place where you plan to alight, and may even travel a substantial distance before you are allowed off the bus. Before boarding such a bus, be sure it stops near your destination.
Most rides of public transport vehicles are without incident, and use of these services is generally safe in all places. But there are plenty of dangers that do exist on all forms of public transportation, and anyone planning on using it, especially in an unfamiliar place, should be aware of these issues:
Theft does occur quite a lot in different forms on public transportation. Pickpocketing is quite common where opportunity exists. Belongings that are left unattended, even for a split second while on turns one's head away, can be grabbed by an opportunistic thief. Some personal items, especially valuable ones like purses, mobile phones and laptops, are taken by physical force. And armed robberies do occur, especially in more isolated areas.
It is important to secure your belongings at all times, and make it so it would take a lot of force to remove them against your will. Do not flash cash; keep the bulk of you cash hidden in a less obvious place, and a wad of many pieces of low-value currency in a more reasonable place to carry it, so a mugger who demands it believes they are really getting all your money. Consider keeping your real mobile phone in a more hidden location and a "dummy phone" (an old or non-working phone) in clearer view, so you can give that to a mugger if need be.
Bus stops are generally out in the open. They are in all parts of town, and they are not secured or patrolled by police full time. Bus stops can be a source of danger, especially in areas known for their trouble.
To evaluate the safety of a bus stop, observe its surroundings. Who is hanging around? Are there any open businesses within a quick jump? Be aware of any dark alleys near the bus stop; they could be the perfect hideout for a would-be mugger or worse. Try if you can to use more popular bus stops where large numbers of people are.
There is proper etiquette that should be followed on all public transportation services:
Many public transportation services are operated by national and local governments. Along with providing and subsidizing this service, the agencies also enforce laws that all users must follow. The laws vary from place to place, but typical laws include: